ET Industrial Fluoro Guard
Fluoro Guard is a premium, natural look, same day, water-based penetrating sealer formulated to provide maximum protection for driveways and traffic areas. Its rapid cure formula protects surfaces in less than 4 hours while allowing moisture vapor transmission.
Applications
This versatile sealer is suitable for various surfaces, including:
- Natural stone
- Unglazed tile
- Porcelain
- Clay pavers
- Concrete
- Brick
- Masonry
- Stone tile grout
Fluoro Guard can be used for both interior and exterior applications.
Key Features & Benefits
- Maximum stain resistance against oils, dirt, and foot traffic
- Water-based formulation for easy application
- Rapid cure time of less than 4 hours
- Reduces efflorescence and organic growth
- Minimises chloride ion attack and protects surfaces from deterioration
- Remains transparent without peeling or yellowing over time
Physical & Chemical Properties
| Property | Test Method | Typical Results |
|---|---|---|
| Stain Resistance | CTI-072 | Excellent |
| pH | – | 8.5 |
| Appearance | – | Clear liquid |
| Colour | – | Colourless – faint yellow |
| Density | – | Approx. 1.0 – 1.1 g/mL |
| Solubility in Water | – | Soluble |
Environmental & Safety Information
Fluoro Guard complies with all Federal EPA and SCAQMD standards for VOC. Although safe when diluted, care must be taken to prevent the concentrate from entering waterways or the environment.
Directions for Use
- The surface should be clean and free of all contaminants. It may be damp but should not have standing water.
- A test area should be conducted to assess suitability.
- Dilute as necessary and apply using a saturated brush, roller, paint pad, or low-pressure sprayer.
- Avoid pooling; if it occurs, spread it out with a soft-bristled broom.
- Remove any excess sealer before it dries to prevent a white film from forming.
- Avoid traffic for at least 24 hours.
- Full curing may take up to 3 days.
Coverage
The coverage is approximately 80-100 m² per 20L, depending on the substrate porosity.
Available Sizes
- 20 Litre container
Precautions
This product may be harmful if swallowed and may irritate eyes and skin. Wear appropriate skin and eye protection when handling. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention.
Disclaimer: The information provided in this technical data sheet is based on our current knowledge and experience. It is the user’s responsibility to ensure the suitability and safety of the product for their specific application.
For further inquiries, please contact us.
